Philips Respironics System One Manuel D'utilisation page 10

Connecting the Optional Heated Tubing
1. To attach the optional heated tubing to the humidifier, line up the humidifier connector end of
the tubing with the Heated Tubing compatible air outlet port on the humidifier. Make sure the
3-pin connector at the top of the tube lines up with the opening at the top of the air outlet port.
Press the tubing into place over the air outlet port until the tabs on the side of the tube click into
place in the slots on the side of the outlet port.
Note: Non-heated Philips Respironics tubing (15 or 22 mm) can still be used with this humidifier with
the heated tubing air outlet port. Simply connect the tubing to the air outlet port. Refer to the therapy
device manual for setup instructions.
Disconnecting the Optional Heated Tubing
1. To remove the heated tubing, press in the tabs on the side of the tubing connector and pull the
tubing away from the outlet port.
8
Heated Tubing
3 Pin Connector
Tabs
Heated Tubing
Tab
Heated Tubing
Slot
Air Outlet Port
Heated Tubing
Air Outlet Port