ETNA KIF880DS/E01 Manuel D'utilisation page 51

SETTINGS
Changing user settings
1. Touch the On/Off key to switch on the hob. Touch the On/off key again within 3 seconds.
The hob goes into standby.
▷
The pause key flashes (maximum 60 seconds).
▷
2. Touch and hold the pause key.
3. Now touch each cooking zone key, starting with the left-front cooking zone button and
proceeding in the clockwise direction.
The menu function appears in the display for the left-front cooking zone. 'U' and a value
▷
flash alternately on the display.
4. Select the setting you want to change using the slide control.
The menu function value appears in the display for the left-front cooking zone.
▷
5. Touch and hold the On/off key for 2 seconds to save the settings and exit the menu.
Touch the pause key to exit the menu without saving the changes.
▷
The table below shows the available settings.
Menu value
U2 Volume for keys
U3 Volume for audio signal
U4 Brightness of display
U5 Timer animation
U6 Automatic pan detection
U7 Length of audio signal
Function Value
1 - 9 (default: 9)
1 - 9 (default: 9)
0 - 9 (default: 0, brightest)
0: Timer animation off
1: Timer animation on (default)
0: Automatic pan detection off
1: Automatic pan detection on (default)
0 - 2 (default: 0)
EN 23