ETNA KIF880DS/E01 Manuel D'utilisation page 44

OPERATION
After 10 seconds the slide control will switch off and the cooking time counter is hidden.
▷
4. Set the power level to '0' or touch the keep warm key to switch off the keep warm function.
Connecting the bridge induction cooking zones
Two bridge induction zones can be connected to each other. This creates one large zone that can
be used, for example, with a grill plate or a large fish pan on the same power. The pan must be
large enough to cover the centres of the front and rear cooking zones.
Connecting bridge induction cooking zones
1. Switch on the hob and put a large pan on two bridge induction cooking zones.
2. Simultaneously touch the left-hand side cooking zone keys.
The rear zone display shows a connection symbol to indicate that the two cooking zones
▷
are connected.
3. Use the slide control to set the desired cooking power for the two connected cooking zones.
4. To change the connected zone's cooking power later, first touch the cooking zone key of the
front cooking zone.
EN 16