ETNA KIF880DS/E01 Manuel D'utilisation page 42

OPERATION
4. Within 10 seconds, set the power level by touching the slide control or the boost key.
The cooking zone starts automatically at the level that has been set.
▷
Set a higher or lower power level with the slide control.
▷
After 10 seconds the slide control will switch off and the cooking time counter is hidden.
▷
When the pan detection symbol appears in the display:
• you have not placed a pan on the correct cooking zone;
• the pan you're using is not suitable for induction cooking;
• the pan is too small or not properly centred on the cooking zone.
▷ The cooking zone does not work until a suitable pan is placed on the cooking zone.
If the hob is not used for 20 seconds, it will shut off automatically.
EN 14