ETNA KIF880DS/E01 Manuel D'utilisation page 41

OPERATION
Starting cooking
Use of the touch keys and slide control
Place the tip of your finger flat on a key or the slide control to achieve the best results. You do not
have to apply any pressure. The touch keys only react to the light pressure of a fingertip.
Do not operate the controls with any other objects.
Each key or slide control activation is followed by an audio signal.
1. Touch and hold the On/off key for 2 seconds until you hear an audio signal.
All cooking zone displays show '0', indicating that the induction hob has entered the
▷
standby mode.
2. Place a suitable pan on the cooking zone.
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
3. The cooking zone automatically detects the pan.
▷ A single beep sounds.
The '0' of the selected cooking zone will light up clearly for approx. 10 seconds.
▷
▷ To select another cooking zone, touch the cooking zone key for the desired cooking zone
or place a second pan on a cooking zone.
EN 13