ETNA KIF880DS/E01 Manuel D'utilisation page 46

OPERATION
Using the cooking timer
1. Select the desired cooking zone and use the slide control to set the desired power level.
2. Touch the timer symbol above the corresponding cooking zone.
The timer display shows '000' and the selected timer symbol flashes.
▷
3. Use the '+' or '-' key to set the desired time (from 1 minute to 1 hours and 59 minutes).
▷ The left position of the timer display shows the hours, the other positions the minutes.
Set the value '0' on the left display if you want to set less than 1 hour.
▷
When the time is set, it starts counting down after 5 seconds.
▷
▷ Touch the corresponding cooking zone key to display the remaining time.
The timer symbol of the active cooking timers lights up brightly.
▷
The selected cooking zone will switch off automatically once the set time has elapsed.
▷
▷ The timer flashes and the alarm beeps after the set time has passed.
4. Touch any key to stop the alarm.
Alarm stops automatically after 2 minutes.
▷
Changing pre-set cooking time
The cooking time can be changed anytime during the operation.
1. Touch the timer symbol above the corresponding cooking zone for which you want to adjust the
cooking timer.
A zone connected to the cooking timer can be identified by the brightly lit timer symbol
▷
above the cooking zone display.
The timer display shows the set time.
▷
2. Use the slide control to change the time.
EN 18