ETNA KIF880DS/E01 Manuel D'utilisation page 43

OPERATION
Finishing cooking
1. Set the power level to '0' to turn off the cooking zone.
2. Turn the induction hob off by touching the On/off key.
The 'H' symbol will appear in the display of the cooking zone which is too hot to touch.
The symbol disappears when the surface has cooled down to a safe temperature. It
can also be used as an energy saving function; if you want to heat other pans, use the
cooking zone that is still hot.
Switching on the automatic heat-up function
1. Switch on the hob and select the desired cooking zone .
2. Touch and hold the slide control for at least 3 seconds at the desired level.
▷ An 'A' appears in the display alternating with the selected power level. When the
automatic heat-up time has expired, the cooking zone will switch automatically to the
selected level, which will show permanently in the display.
3. To stop the automatic heat-up function, select the cooking zone and touch the slide control.
Switching on the keep warm function
1. Switch on the hob and place a suitable pan on one of the cooking zones.
2. Press the cooking zone key of the desired cooking zone.
▷ The '0' of the selected cooking zone will light up clearly and a single beep sounds.
3. Touch the keep warm key.
The keep warm symbol 'u' appears in the display. The keep warm function is selected.
▷
EN 15