Publicité
Les langues disponibles
Les langues disponibles
• Pressing several times this key will cause speed to change according to the fol-
lowing sequence:
• The higher the speed setting, the greater the output of the air conditioner but also
the louder its operation.
• By setting the Automatic mode, the onboard microprocessor adjusts the automatic
speed. The higher the difference between the room temperature detected and the
temperature set, the higher the speed.
• As the room temperature nears the setting, fan speed is reduced automatically.
• In dehumidification mode, it is not possible to control the speed as the appliance
can only operate exclusively at low speed.
3.5.11 - SILENT key
• To activate this mode, press the B3 key on the remote control, the D6 symbol
appears on the display.
• Activating the SILENT allows you to obtain multiple results:
- gradual increase in the set temperature during cooling mode
- gradual decrease in the set temperature for heating (HP versions only)
- reduction of the sound level of the appliance
- decrease of the fan speeds
• For activation of the SILENT function, it is first necessary to select the operating
mode and the desired temperature, then activate the SILENT function by pressing
the key B3.
• Noise reduction entails an optimization of noise and thermal/cooling capacity of
the machine. In the event that, in some moments, the thermal/cooling power is
insufficient, deactivate the SILENT function.
3.5.12 - Timer setting
• The appliance logic allows the User to make use of two different timer programs
(see paragraph 3.5.14), thanks to which the appliance can be deactivated and
activated (or vice versa) whenever desired (for example, it can be activated shortly
before returning home so as to find an already pleasant temperature in the room).
• Firstly, if it is desired to make use of these functions, set the correct time (see
paragraph 3.5.13) and then set the timer as you prefer.
Low > Medium > High > Automatic.
EN - 37
UNICO EVAN R32
Publicité
