Olimpia splendid UNICO PRO R32 EVAN Mode D'emploi Et D'entretien page 80

2.4.5 - Positioning of the device on the anchor bracket
Working on the two previously drilled holes
(see fig. 6), fix the support bracket (L) to the
wall using the supplied wall plugs screws
(H) (fig. 22a).
After checking:
that the fixing bracket is well anchored
to the wall,
that the installation site has been
prepared for electrical connection and
condensation discharge (if necessary),
it is possible to hook the air conditioner.
Work as follows:
a. Apply adhesive tape (A) to have refer-
ences to the hooking points of the unit
(fig. 22b).
The tape can be removed once the unit
has been hooked to the wall.
b. Lift the air conditioner by holding it on
the sides of the lower base and hook
it to the bracket (L) (fig. 23).
Slightly tilt the lower part of the ap-
pliance towards yourself to ease the
operation.
EN - 24
23
L
22a
L
E
22b
A
A
903mm
E
A
A
A
215mm
520
mm
~38,5 kg