Publicité
Les langues disponibles
Les langues disponibles
The control system of the unit is equipped with memory, for this reason all the
settings won't be lost when shutting off the appliance itself.
In case of prolonged stop of the machine, it must be deactivated turn-
ing the main switch off or unplugging the machine from the mains.
3.5.4 - Operation in "Cooling" mode only
• When used in this mode, the air conditioner dehumidifies and cools the room.
• To activate this mode, press the key B4 on the remote control several times until
the D3 symbol appears on the display.
• In this run mode, the required temperature and fan speed can be set.
After three minutes (as a maximum) from activation in this operating mode the
compressor will start and the appliance starts emitting cold air.
.5.5 - Operation in "Dehumidification" mode only
3
• When used in this mode, the air conditioner eliminates the humidity in the room.
This function can be extremely useful between seasons, particularly on rainy
days when the temperature is not uncomfortable but the excess humidity feels
unpleasant.
• In this mode, both room temperature and fan speed settings are ignored, which
correspond to minimum.
• Then, any indication of temperature and speed of the fan disappears from the
display of the remote controller and from the control panel.
• To activate this mode, press the B4 key on the remote control several times until
the D4 symbol and the D1 (fan plus first notch) automatic ventilation symbol appear
on the display.
• In this operating mode it is normal for the air conditioner to function intermittently.
3.5.6 - Operation in "Ventilation" mode only
• When used in this mode the air conditioner does not perform any action with regard
to temperature and air humidity in the room.
• To activate this mode, press key B4 on the remote control several times until the
automatic ventilation symbol D1 (fan plus first notch) appears on the remote control
display.
3.5.7 - Operation in "Spa" mode only (Automatic)
• In this mode, the machine's temperature is automatically regulated according to
the room's temperature. The fan speed is also automatically regulated according
to the set temperature (except in dehumidification mode).
EN - 35
UNICO EVAN R32
Publicité
