Dräger X-plore 8000 Serie Notice D'utilisation page 12

en |
Use
unventilated containers, e.g. pits, ducts, etc. with the Dräger
X-plore 8000 facepieces and powered air-purifying
respirators!
The following factors can impair the protective effect of the
facepieces:
– High wind speeds and strong crosswinds.
– Earpiece or beards in the sealing cuff area.
3.5 Approvals
The Dräger X-plore 8000 face shield is approved according
to:
Standard
EN 166 (eye-guard)
Legend:
Meaning of the marking according to EN 166
1
BT
3
9
All parts comply with the requirements of the following
regulations:
– (EU) 2016/425
– (EU) 2016/425 as brought into UK law and amended
For information on the respective system approvals, please
refer to the instructions for use of the respirators listed in
section 3.3.
Declarations of conformity: see www.draeger.com/product-
certificates
3.6 Explanation of type-identifying
marking and symbols
The name plate shown is an example. The specifications vary
depending on the facepiece.
12
Performance level/Marking
1 BT 9 3
Optical class
Protection against high-
speed particles at extreme
temperatures
Protection against liquid
splashes
Protection against melted
metal and hot solids
1
X-plore 8000 Face shield
2
3710810
3 012345678
2021 - 04
4
EN 166:2001 1 BT 3 9
5
EN 12941:1998+A1:2003 +A2:2008 TH2
EN 14594:2018 Class 3B
0158
SAI Global
AS/NZS 1716:2012
Lic No SMK1346
WARNING! THIS IS NOT AN INDUSTRIAL
SAFETY HELMET.
WARNING! THIS FACE SHIELD IS A
SECONDARY PROTECTION DEVICE.
USE WITH SAFETY GLASSES:
PLEASE DO NOT RAISE THE VISOR DURING
USAGE, FAILURE TO FOLLOW THIS
INSTRUCTION TO USE THIS PRODUCT MAY
SERIOUSLY AFFECTS THE USER'S HEALTH.
6
Size Range: 51-64cm (6⅜-8in.)
7
www.draeger.com
8 Dräger Safety, 23560 Lübeck, Germany
Importer (UK): Draeger Safety UK Ltd, Blyth, UK
1 Product name
2 REF: part number
3 LOT: batch
4 Date of manufacture
(here: April 2021)
5 Approval reference
4 Use
4.1 Preconditions for use
– Type and concentration of the contaminants must be
known. When checking the conditions of use, also pay
attention to whether additional protective clothing is
required.
– When used with a powered air-purifying respirator, the
oxygen content of the ambient air must not fall below the
following limit values:
● 17 Vol% in Europe excluding Netherlands, Belgium,
UK,
● 19 Vol% in Netherlands, Belgium, UK.
● 19.5 Vol% in the USA.
For other countries, observe national regulations!
Instructions for use |
0086
9
+50°C
10
< 90% RH
-30°C
Made in China
6 Size
7 Symbol "Follow instructions
for use"
8 Distributor
9 Ambient conditions: mois-
ture
10 Ambient conditions: tem-
perature
Dräger X-plore 8000 Face Shield