Publicité
Les langues disponibles
Les langues disponibles
Cleaning (qualified contractors)
u Pull the pressure hose out of the fan unit.
The fan unit is fixed to the appliance with wedges. On the un-
derside of the wedges is a tooth system.
D0000115753
u To release the teeth of a wedge, press the two tabs together
and pull the wedge below the fan unit forward.
u Remove the wedge from the appliance.
D0000115754
u Pull the fan unit into the middle of the appliance and tilt the
fan unit.
58
| LWZ-W 450/600 Premium
D0000115755
u On the back of the fan unit, unplug the temperature sensor
from the duct.
u Separate the plug (control cable and mains cable to the fan)
from the remainder of the permanently fitted wiring har-
ness.
The fan unit has now been fully separated.
u Remove the fan unit from the appliance.
u Clean the fan unit with a soft brush.
If you can see heavy soiling inside the fan unit, unscrew the ex-
ternal screws on the back of the fan unit.
D0000117330
u Separate the two halves of the fan unit.
u Clean each half and the impeller using a cloth moistened
with water or a soft brush.
u Screw the two halves of the fan unit together.
1
D0000117192
1 Pressure hose retainer
u Push the pressure hose into its retainer.
www.stiebel-eltron.com
Publicité
