Spec - Special Functions - Futurelight Scan SC - 530 Mode D'emploi

- Tilt reverse
This function allows you to invert the tilt movement. Use the [Up] and [Down] keys to select "On" if you wish this
feature or "Off" if you don't wish this feature and press [Enter] to confirm or [Mode] to cancel and return to the
main menu.
- Movement resolution
By this function you can adjust the desired movement resolution 8 or 16 bit. Use the [Up] and [Down] keys to
select 'On' if you wish the 16bit high resolution or "Off" if you wish only 8 bit resolution and press [Enter] to
confirm or [Mode] to cancel and return to the main menu.
Note:
If you adjust the 16 bit resolution the fixture will occupy 12 DMX channels, if you adjust the 8 bit resolution, the
fixture will be operated by only 10 DMX channels. Please, check the DMX protocol.
- Lamp On time
This option enables you to read the total number of hours that the lamp has been powered On. Press [Enter] or
[Mode] to return to the main menu.
- Power On time
By this option you can read the total number of hours that the projector has been powered On. Press [Enter] or
[Mode] to return to the main menu.
- Switch On / Off the lamp
Use the [Up] and [Down] keys to select "On" if you wish the switch On the lamp or "Off" if you wish switch Off
the lamp and press [Enter] to confirm or [Mode] to cancel and return to the main menu.
- Test program
This function allows you to run a special test program without an external controller, which show you some
possibilities of using SC-530/570. Press the [Enter] key to run the test program.
- Reset Function
Press [Enter] key to run reset. This option enables the SC-530/570 to index all effects (functions) and return to
their standard positions.

7.2 SPEC - Special functions

Use the [Up] and [Down] keys to browse through the special functions and select the one by pressing [Enter].
- Manual control of effects
This function allows you to control manually the channel functions of the fixture. Use the [Up] and [Down] keys
to select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the menu.
2 7