Main Functions; Spec -Special Functions - Futurelight CC-200 Color changer Mode D'emploi

sections and the function hierarchy is shown below.

7.1 Main functions

- DMX 512 Address settings
The letter "A" flashes. Use the [Up] and [down] keys to select required address (001 - 496) and press
[Enter] to confirm or [Mode] to cancel and return to the main menu.
- Lamp On time
This option enables you to read the total number of hours that the lamp has been powered on. Press [Enter]
or [Mode] to return to the main menu. In order to reset the counter to 0, you have to hold the Up- and Down-
button and press the Enter-button.
- Power On time
By this option you can read the total number of hours that the CC-200 has been powered on. Press [Enter]
or [Mode] to return to the main menu.
- Switch on / off the lamp
Use the [Up] and [Down] keys to select "On" if you wish the switch on the lamp or "Off" if you wish switch
off the lamp and press [Enter] to confirm or [Mode] to cancel and return to the main menu.
- Test program
This function allows you to run a special test program without an external controller, which show you some
possibilities of using CC-200. Press the [Enter] key to run the test program.
- Reset Function
Press [Enter] key to run reset. This option enables the CC-200 to index all effects (functions) and return to
their standard positions.

7.2 SPEC -Special functions

Use the [Up] and [Down] keys to browse through the special functions and select the one by pressing
[Enter].
- Manual control of effects
This function allows you to control manually the channel functions of the fixture. Use the [Up] and [Down]
keys to select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the
menu.
- Lamp On automatically
This function enables to switch on the lamp automatically after switching on the fixture. Use the [Up] and
33