Dmx-Protocol; Function Of The Control Channels - Futurelight CC-200 Color changer Mode D'emploi

4.1 Function of the control channels

4.1.1 Channel 1 - Colour-wheel
Linear colour change following the movement of the slider. In this way you can stop the colour-wheel in any
position - also between two colours creating double-coloured beams.
Between 128 and 255, the colour-wheel rotates continuously the so-called "Rainbow" effect.
0
10
21
32
42
53
64
4.1.2 Channel 2 - effect-wheel
0-20
21-42
43-63
64-84
85-106
107-127
128-148
149-170
171-191
192-212
213-234
235-255
4.1.3 Channel 3 - shutter, strobe
0
127
128-139
140-148
149
150-219
220-229
230-239
240-255
* The default setting for the ventilation fan is "HIGH". With this selection, the fan speed cannot be reduced.
In order to reduce the fan speed please refer to "7.2 SPEC -Special functions".

4. DMX-Protocol

Open/white
Turquoise
Red
Cyan
Green
Magenta
Light Blue
Full open
Color temperature correction 3200 K
Color temperature correction 5600 K
Magenta
Cyan
Yellow
Wood light
Gobo 1
Gobo 2
Beam reducer 1
Beam reducer 2
Beam reducer 3
open, max. speed of fan
open, min. speed of fan (silent operation) *
Switch On the lamp, reset, open position
closed
closed in reverse position
strobe-effect slow to fast (max 8 FPS)
open position
shutter is in half position of the beam - Lamp Off after 3 sec.
open position
30
74 Yellow
85 Green
96 Pink
106 Blue
117 Orange
128-256 Rainbow effect
from slow to fast