Operation; Stand Alone Operation; Master/Slave-Operation; Dmx-Controlled Operation - Futurelight EVO-3 Lighting effect Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION

After you connected the effect to the mains, the EVO-3 starts running. During the Reset, the motors are
trimmed and the device is ready for use within approximately 20 seconds.
Turn the objective-lens for adjusting the focus in order to obtain a sharp projection.

Stand Alone operation

In the Stand Alone mode, the EVO-3 can be used without controller. You can do without a controller as the
EVO-3 features a built-in microphone, which provides automatic sound control.
Disconnect the EVO-3 from the controller. The lamp is automatically ignited as soon as the condensor
microphone receives music signals.

Master/Slave-operation

Connect the master and slave-devices as desribed above and set the DIP-switches accordingly.
Mic Sensitivity-/Channel Value-selector
1. Put the Dip-switch in the Sound mode and adjust the sensitivity of the activated sound by turning the Mic
Sensitivity-/Channel Value-selector.
3. In the Master mode you can select the different channels and adjust the value with the Mic Sensitivity-/
Channel Value-selector.

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.

DMX-protocol

Control channel 1 - Rotating fibre optic module
Decimal Hexad. Percentage S/F
0 7
00 07
0% 3%
8 119 08 77
3% 47%
120 131 78 83
47% 51%
132 255 84 FF 52% 100%
Control channel 2 – Colour-wheel
Decimal Hexad. Percentage S/F
0 127 00 7F
0% 50%
128 187 80 BB 50% 73%
188 193 BC C1 74% 76%
194 255 C2 FF 76% 100%
Control-channel 3 - Shutter, strobe
Decimal Hexad. Percentage S/F
0 31
00 1F
0% 12%
32 63
20 3F
13% 25%
64 95
40 5F
25% 37%
96 127 60 7F
38% 50%
128 159 80 9F
50% 62%
160 191 A0 BF 63% 75%
192 223 C0 DF 75% 87%
224 255 E0 FF 88% 100%
S No rotation
F Forwards fibre optic effect with decreasing speed
S No rotation
F Backwards fibre optic effect with increasing speed
F Color indexing
F Forwards rainbow effect with decreasing speed
S No rotation
F Backwards rainbow effect with increasing speed
S Shutter closed
S Dimmer (closed to open)
F Strobe-effect with increasing speed
S No function (shutter open)
F Pulse-effect in sequences
S No function (shutter open)
F Random strobe-effect with increasing speed
S No function (shutter open)
28/58
Feature
Feature
Feature
51837556_V_1_1.DOC

Publicité

Table des Matières
loading

Table des Matières