ECOVACS WINBOT W1 PRO Manuel D'instructions page 9

Quick Start
1
Connect WINBOT Power Cord, Power Adapter and Plug
Please ensure the battery is fully charged before using. Charging time will be approx. 2 hours.
*Do not cut the power off when WINBOT is running, otherwise it may lead to the risk of falling.
Connect correctly in the order shown above. Improper connection may cause charging abnormalities or damage to the battery.
2
Preparation before Use
Fill up the Reservoir
It is recommended to use with ECOVACS WINBOT Cleaning Solution. The maximum volume of the Reservoir is about 60 ml, and it can spray
for about 60 minutes when the Reservoir is full.
Note: Do not add purified water and filtered water.
Do not add too much cleaning solution to overflow the Reservoir.
Using other cleaners could have an adverse effect on cleaning performance.
If the cleaning solution is used up, you can temporarily use tap water instead. Using the ECOVACS WINBOT Cleaning Solution can have a better
cleaning performance.
Step 1
Maximum 60ml
Step 2
9
EN