ECOVACS WINBOT W1 PRO Manuel D'instructions page 10

Install Mopping Pad
① Wet the Mopping Pad
Before using, wet the Mopping Pad manually.
②
Twist the Mopping Pad to wring water out. To ensure cleaning
performance, wring it out as much as you can.
10
EN
③ Stick the Mopping Pad
Stick the Mopping Pad onto the Velcro at the bottom of WINBOT, and press
it with your hands to help the Mopping Pad stick firmly.
Tie the Safety Tether
Properly tie the safety tether to a stable object that cannot be easily moved
(e.g. table leg, chair leg, bed leg, sofa leg, curtain rod, stair handrail, etc.),
and lock the carabiner as shown below.
Hang the rope and wrap it around the surpport.
Open the carabiner, then attach it to the rope on the other side.
Note: To ensure safety, please make sure to secure the carabiner before use.
It is recommended to fasten the Safety Tether with the Carabiner on a firm and
safe metal railing.
Narrow Side
Wide Wide
Side Side
Narrow Side