Mercado Medic REAL 9200 TWIN Manuel D'utilisation page 92

Instructions for use for medical bariatric work chairs
ID Area
8.2 Bolted joints
8.3 Plastic plugs
8.4 Controls
9 Backrest mechanism
9.1 Mechanics
9.2 Attachment
9.3 Plastic plugs
10 Armrests
10.1 U-bars
10.2 Function
10.3 Plastic plugs
10.4 Armrest mechanics
Reconditioning instructions
Check and tighten all screw joints. Replace screws that have
damaged key handles or threads.
Check that guide bushings and plastic plugs are properly
secured. Replace worn or damaged parts.
Make sure that all knobs and handles on the seat frame are
working and that they lock correctly.
Check and replace any worn parts, carefully inspect for
cracks in welds as they may have been heavily loaded
for a long time. Ensure good lighting and preferably use a
magnifying glass, as small cracks can be difficult to detect
on black lacquered structures. Check that the moving parts
work properly.
Make sure that all screws, knobs and handles are easy to
move and lock properly. Check that the spring button clips
are working flawlessly.
Check that guide bushings and plastic plugs are properly
secured. Replace worn or damaged parts.
Carefully check the U-bars for cracks and paint damage.
Check especially around welds and grooves for the locking,
as these areas are particularly subject to load. Ensure
good lighting and preferably use a magnifying glass, as
small cracks can be difficult to detect on black lacquered
structures. Fill in any varnish damage with touch-up paint to
avoid corrosion.
Check and replace any worn parts. Test that locking and
function in moving parts are working properly. Check that
knobs and screws are working and have no damage to
threads or grip surfaces.
Check that guide bushings and plastic plugs are properly
secured. Replace worn or damaged parts.
Check all welds and that there is no damage to mechanical
parts that may impair or weaken the structure. Ensure
good lighting and preferably use a magnifying glass, as
small cracks can be difficult to detect on black lacquered
structures. Fill in any varnish damage with touch-up paint to
avoid corrosion.
44
Servicing & reconditioning
21-08861-EN-04