Mercado Medic REAL 9200 TWIN Manuel D'utilisation page 72

Instructions for use for medical bariatric work chairs
5.11. Manual brake
Manual brake is available in two versions, brake lever (350 mm as standard) and foot brake
(optional). The brake lever is available in two models, brake lever with knob and brake lever
with loop. The brake lever with knob is available in three lengths: 250 mm (optional), 350 mm
(standard) and 450 mm (optional). The brake lever with loop (optional) is available in length
530 mm. Configurations with a seat width of 620 mm and above are also supplied with
an adapter that allows the brake lever to be angled out outside the seat. The brake is also
available as an electrical function, see 5.3. Electrical functions.
Brake lever
The brake lever can be located on the right (A) or left (B)
side of the base, see Figure 5.16.
Activation and deactivation:
1. Move the brake lever forwards to the locking position
to brake.
2. Pull the brake lever backwards to disengage.
Handbrake lever adapter setting:
The adapter can be placed on the right or left side of
the based and adjusted at an angle (A), see Figure 5.17.
The adapter is placed in the brake lever bracket and the
brake lever is then placed in the adapter.
1. Loosen the screw and adjust to the desired angle.
2. Tighten the screw.
Figure 5.16. Brake lever.
Figure 5.17. Handbrake lever adapter.
24
Configurations and settings
A B
A
21-08861-EN-04