Dreame DreameBot X30 Ultra Manuel D'utilisation page 23

Routine Maintenance
Filter
1. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects
to prevent damage.
2. Rinse the dust box and filter with water and dry them completely before
reinstalling.
Note:
·
Rinse the dust box and filter with clean water only. Do not use any detergent.
· Use the dust box and filter only when they are completely dry.
Robot Sensors and Charging Contacts
Wipe sensors and charging contacts of the robot by using a soft and dry cloth,
as shown in the below figure:
Laser Distance
Sensor (LDS)
Cli Sensors
Note: A wet cloth can damage sensitive elements within the robot and the
base station. Please use a dry cloth for cleaning.
EN
AI Visual Sensor
Line Laser Sensors
LED Auxiliary Lights
Edge Sensor
Bumper
Charging Contacts
Carpet Sensor