Dreame DreameBot X30 Ultra Manuel D'utilisation page 14

Connecting with the Dreamehome App
EN
1. Download the Dreamehome App
Scan the QR code on the robot, or search "Dreamehome" in the app store to
download and install the app.
Note:
·
Only 2.4 GHz Wi-Fi is supported.
· Due to upgrades in the app software, the actual operations may differ from
the directions in this manual. Please follow the instructions based on the
current app version.
QR Code
2. Add Device
Open the Dreamehome app, tap "
same QR code on the robot again to add the device. Please follow the prompts to
finish the Wi-Fi connection.
Note: If you want to reset Wi-Fi, repeat step 2 and then follow the prompts to
finish the Wi-Fi connection.
QR Code
" in the upper right corner, and scan the
Wi-Fi Indicator
· Blinking slowly:
To be connected
· Blinking quickly:
Connecting
· On: Connected