Dreame DreameBot X30 Ultra Manuel D'utilisation page 19

Routine Maintenance
Washboard Base
The base station will perform washboard self-cleaning along with each mop
pad cleaning. For deep cleaning, please refer to the following steps.
1. Enable the washboard base cleaning function in the app, and the robot
will exit the base station automatically. Take out the washboard and wait for
water to fill the washboard base.
2. Rinse the washboard with clean water, and use the cleaning tool to clean
the washboard base.
3. After a moment, the base station will automatically pump out the used
water. Then wipe the washboard base with a soft and dry cloth, and put the
washboard back into place.
Note: When the cleaning task is done, put the washboard back into the base
station downwards in an inclined way.
4. Use the app or briefly press the button
the base station.
Note: During cleaning, do not make the robot return to the base station.
on the robot to make it return to
EN