Publicité
Les langues disponibles
Les langues disponibles
Routine Maintenance
EN
Side Brush & Mop Pad Holder
Remove and clean the side brush and mop pad holder.
Omnidirectional Wheel
Note:
·
Use a tool such as a small screwdriver to separate the axle and tire of the
omnidirectional wheel. Do not use excessive force.
·
Rinse the omnidirectional wheel under the running water and put it back
after drying it completely.
Dust Box
1. Open the robot cover and press the dust box clip to remove the dust box.
2. Open the dust box side cover and empty the dust box as shown in the
diagram.
Publicité
