Vaillant recoVAIR VAR 60/1 D Notice D'installation page 112

5.5.2 Connecting the MASTER and
SLAVES
Applicability: VAR 60/1 D
1 2
N L S1 S2 C1 C2 N L S1 S2 C1
N
L
▶
Use the control cables to connect the
MASTER (1) and SLAVES (2), (3), (4)
as follows.
– All SLAVES with odd numbers
((3), 5, 7, etc.) always have the
same ventilation direction as the
MASTER (1).
– All SLAVES with even numbers
((2), (4), 6, etc.) always have the
opposite ventilation direction to the
MASTER (1).
– Terminals S1 and S2 remain un-
assigned for the SLAVE with the
highest number.
0020236694_02 recoVAIR Installation instructions
3 4
C2 N L S1 S2 C1 C2 N L S1 S2 C1 C2
5.5.3 Mounting the wall-mounting
frame
Ø 6
4x
Ø 5
B
4x
A
1
1. Use suitable rawl plugs and flat-head
screws to install the wall-mounting
frame (1).
2. Wire the cables.
5.5.4 Connecting the control's
control cable to the MASTER
Applicability: VAZ CPC, VAR 60/1 D
C2 C1 S2 S1
L
N
C2 C1 S2 S1 L N
▶
Connect the control's control cable to
terminals C1 and C2.
Installation 5
C2 C1 S2 S1
L
N
C
109