Vaillant recoVAIR VAR 60/1 D Notice D'installation page 110

Information on the
identification plate
Serial number
3.3 CE label
The CE label shows that the products
comply with the basic requirements of the
applicable directives as stated on the iden-
tification plate.
The declaration of conformity can be
viewed at the manufacturer's site.
4 Assembly
4.1 Checking the scope of delivery
▶
Check that the scope of delivery is com-
plete.
Quant- Contents
ity
1 Front panel
1 Wind protection
1 Wall-mounting frame
1 Fan unit
1 Regenerator with two filters
1 Operating instructions
1 Installation instructions
5 Installation
5.1 Observing the requirements
for the product's installation
site
The product can be installed in flats, cellar
rooms, storage or utility rooms, and in at-
tics.
▶
Observe the current applicable national
construction regulations.
0020236694_02 recoVAIR Installation instructions
Meaning
The 7th to 16th digits
of the serial number
form the article num-
ber
▶
Ensure that the installation site is dry
and is frost-proof throughout.
▶
When determining the installation loc-
ation, take into consideration the pro-
duct's sound power level and sound re-
duction index.
Technical data – General (→ Page 113)
▶
Take into consideration the diameter of
the pipe and the minimum clearances to
ceilings, windows and corners.
5.2 Installing the pipe from the
pre-installation set
1. Insert the pipe from the pre-installation
set into the designated position on the
external wall.
– In doing so, observe the set-up in-
structions that are enclosed with the
product.
2. Ensure that the power supply cable
and the control cable are not damaged
when you drill through the wall.
5.3 Installing the outer hood
▶
Install the outer hood and its wall-
mounting frame.
– In doing so, observe the set-up in-
structions that are enclosed with the
product.
– Use suitable rawl plugs and flat-head
screws.
Assembly 4
107