Publicité
Les langues disponibles
Les langues disponibles
1
2
Wear mark
1
Suction lip
2
1. Remove the suction bar.
2. Unscrew the star handles.
1.
2.
3.
3. Pull off the plastic parts.
4. Pull off the suction lips.
5. Push in the turned over or new suction lips.
6. Push on the plastic parts.
7. Screw in and tighten the star handles.
Cleaning the coarse dirt sieve
1. Open the waste water tank cover.
Coarse dirt sieve
1
2. Pull the coarse dirt sieve upwards and off.
3. Rinse off the coarse dirt sieve under running water.
4. Reinsert the coarse dirt sieve into the waste water tank.
1. Drain the fresh water (see Chapter Draining fresh wa-
2. Unscrew the fresh water tank lock.
CHANGE LIP
1.
3. Pull out the fresh water filter and rinse with clean water.
4. Insert the fresh water filter.
5. Fit the fresh water tank lock.
1. Open the waste water tank cover.
2. Release the latching hooks.
3. Pull the float housing downwards and off.
4. Remove the float from the float housing and clean it.
5. Remove the fluff filter and clean it.
1
6. Assemble all parts in the reverse order.
English
Cleaning the fresh water filter
ter).
1
Fresh water tank lock
1
Fresh water filter
2
Note: Ensure that the hose connection in the fresh wa-
ter tank lock lies at the lowest point after screwing tight.
Clean the float and fluff filter
Latching hooks
1
Float
2
Fluff filter
3
Float housing
4
2
13
Publicité
