Publicité
Les langues disponibles
Les langues disponibles
Tilt Control
The AP300/450 is equipped with a tilt sensor that activates once the lift tilts past a certain angle,
restricting upward movement until the lift is adjusted. Tilt should be avoided as much as possible
during the lifting/transferring process.
Front Cover Membrane
Along with the hand control, the lift can be controlled with the membrane on the front cover of the
lift. The membrane includes Up/Down and Emergency Down buttons, as well as the indicator
light.
Raise or Lower the Lift
1.
Hold the Hand Control in one hand.
2.
If possible, hold the lift in the other hand so that it will not accidentally sway and knock into
an individual or nearby object.
3.
To raise the lift, press the Up button
4.
To lower the lift, press the Down button
Figure 7: Two Direction Tilt Sensor
Figure 8: Front Cover Membrane
.
.
9
Publicité
