Publicité
Les langues disponibles
Les langues disponibles
The lift automatically shuts off after approximately 3 minutes of non-use.
In an emergency, the lift can also be shut off by switching the Emergency Stop
Switch to "Off." See "Emergency Stop" (page 14) for details on Emergency Stop
and restarting the lift after an Emergency Stop.
The AP300/450 lift hand control:
•
Controls lift motion
•
Presents active lift status display
•
Provides usage data and diagnostics.
Hand Control Display Functionality
The AP300/450 lift Hand Control works in two modes:
1.
Control Mode to display command icons and active lift status display
2.
Diagnostic/Information Mode to display lift usage and diagnostic information
See "Hand Control Icons" on page 23 for details on the display information and what it means.
Pivoting Hooks
The AP300/450 Ceiling lift has hooks that can be turned upwards for storage and transport. The
hooks must always be in the "DOWN" position when performing a lift. (Figure 5).
Figure 6: Left – Hooks down for lifting. Right – Hooks up for storage.
Turn Off the Lift
Hand Control Operation
Lift Features
Figure 4: Battery Indicator LED on
lift membrane
Scroll Up/Down
and OK Buttons
Figure 5: AP300/450 Hand Control Button Layout
8
LCD
Display
Up/Down
Buttons
Publicité
