Publicité
Les langues disponibles
Les langues disponibles
IEC 60601-1-2:2014—(Ed 4.0) EMC/EMI
The equipment needs special precautions regarding EMC and needs to be
installed and put into
service according to the EMC information provided in the accompanying
documents.
•
The portable and mobile RF equipment can affect the equipment.
•
Use of accessories and cables other than those specified, with the
exception of accessories and cables qualified and sold by the
manufacturer of the equipment may result in increased emissions or
decreased immunity of the equipment and may cause the system to be
non-compliant with the requirements of IEC 60601-1-2:2014.
•
The equipment should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, the
equipment should be observed to verify normal operation in the
configuration in which it will be used.
The table below elaborates the emission compliance of the equipment's
electronics.
The equipment is intended for use in the electromagnetic environment
specified below. The customer or the user of the equipmenet should
assure that is is used in such an environment.
Compliance Guidelines
The equipment uses RF energy only for
its internal function. Therefore, its
RF emissions are very low and are not
likely to cause any interference in
nearby electronic equipment.
The equipment is suitable for use in
all establishments including
domestic establishments and those
directly connected to the pucliv low
voltage power supply network that
supplies buildings used for domestic
purposes.
25
Publicité
