Publicité
Les langues disponibles
Les langues disponibles
Tilt & Lift 25 RTS
3. USE AND MAINTENANCE
͉
This motor is maintenance-free
3.1. MODE SELECTION: ROLLER OR TILTING MODE
͉
The mode selection is only possible if step 2.3.4. Recording the RTS control
point has already been completed.
The Drive is designed to work with 2 modes: Tilting mode or Roller mode.
This feature allows the drive to be set according to the type of blind you are
working with. The drive is set by default to work in Tilting mode.
1) Move the motorised product away from the
end limits.
2) Simultaneously press the Up and Down
buttons until the motorised product moves up
and down.
3) Press and hold the my and Down buttons
simultaneously until the motorised product
moves up and down to change from Roller
mode to Tilting mode.
To return to previous mode, repeat step 1.
3.2. UP, DOWN, MY: IN ROLLER MODE
1) To move the motorised product from a limit to
the other limit, press briefly the Up or Down
button.
2) To stop the motorised product, press the my
button.
3) If a my position is recorded,To move the moto-
rised product to this my position, press briefly
the my button.
Copyright
2021 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
©
1
1
2 2
3 3
1
1
2 2
3 3
EN
23
Publicité
