Publicité
Les langues disponibles
Les langues disponibles
Tilt & Lift 25 RTS
2. INSTALLATION
Attention
• These instructions are mandatory for motorisation and auto-
mation professional installing the drive.
• Never drop, knock, drill or submerge the motor.
• Install an individual control point for each motor.
2.1. ASSEMBLY
2.1.1. Drive preparation
1) Cut the shaft to the length required.
2) Position the headrail and shaft adapters on
the motor
2.1.2. Motor integration inside the headrail
1) Insert the motor in the headrail.
Attention
Take care not to cut the power supply
wires on the edges of the headrail when
introducing the motor.
2) Let the shaft abut against the motor shaft
adapters.
͉
For optimal radio reception, the antenna should
be kept straight and outside the headrail.
Copyright
2021 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
©
1 1
2 2
1
1
2
2
EN
17
Publicité
