SOMFY Tilt 25 RTS Notice page 24

EN
3.3. UP, DOWN, MY: IN TILTING MODE
1) To move the motorised product from a limit
to the other limit, briefly press (less than 0,5s)
the Up or Down button.
2) To stop the motorised product, press the my
button.
3) If a my position is recorded,To move the
motorised product to this my position, press
briefly the my button. The motorised product
first goes to the down end limit, then to the
my position.
4) To tilt the slats, press and hold the Up or
Down button or use the scroll of the remote control, until the slats reach
the desired position.
3.4. ADDITIONAL SETTINGS
3.4.1. Record or Modify the favourite position (my)
1) Place the motorised product in the desired
favourite position (my).
2) Press the my button until the motorised prod-
uct moves up and down: the desired favourite
position (my) has been programmed.
͉
In tilting mode (the default mode), if you want to
save a favorite slat position, turn the motorised
product necessarily in the down end limit, then
set the desired position by pressing the Up button.
3.4.2. Deleting the favourite position (my)
To delete the my position, press the my button to
move to this position and press the my button until
the motorised product moves up and down.
24 Copyright 2021 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
©
Tilt & Lift 25 RTS
1 1
2 2
3 3
4 4
1 1
2 2