SOMFY Tilt 25 RTS Notice page 22

EN
the motorised product moves up and down and the RTS control point is
programmed or deleted from the motor.
2.4.4. Erasing the control point from the memory of the
motor
To delete all the programmed control points,
press and hold the motor PROG button until the
motorised product moves up and down twice.
All the control points are deleted.
2.4.5. Erasing the memory of the motor
To reset the motor, press and hold the PROG
button on the motor head until the motorised
product moves up and down 3 times.
All the settings are erased.
22 Copyright 2021 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
©
Tilt & Lift 25 RTS
x2
x2
x3
x3