SOMFY Tilt 25 RTS Notice page 16

Les langues disponibles

Tilt & Lift 25 RTS

1. PRIOR INFORMATION

1.1. SPHERE OF APPLICATION

Tilt&lift are designed to drive most types of interior roman blinds, venetian

blinds, pleated blinds and cellular blinds.

The installer, a home motorisation or home automation professional, must

ensure that once the driven product is installed, it respects the current

standards in the country of installation, notably standard EN 13120 relative to

interior blinds.

1.2. LIABILITY

Before installing and using the drive, please read these instructions carefully. In

addition to the instructions provided in this guide, please also comply with the

instructions set out in the enclosed Safety instructions document.

The drive must be installed by a home motorisation and automation

professional, in accordance with Somfy's instructions and the applicable

regulations in the country of installation.

Any operation of the drive outside the sphere of application described above is

prohibited. Such operation shall exclude Somfy from all liability and invalidate

the Somfy warranty, as will any failure to comply with the instructions given

herein and in the enclosed Safety instructions document.

After installing the drive, the installer must inform his customers of the

operating and maintenance conditions for the drive and must pass the

operating and maintenance instructions on to them, as well as the enclosed

Safety instructions document. Any After-Sales Service operation on the drive

requires intervention by a home motorisation and automation professional.

Should any doubt arise during installation of the drive or for additional

information, consult a Somfy contact or visit www.somfy.com.

Lift 25 rts