Publicité
Les langues disponibles
Les langues disponibles
EN
Dear customer,
Thank you for purchasing an ALFRA product. Read these operation instructions closely before using your
device for the first time and keep them for later reference.
SAFETY INSTRUCTIONS
During work with this machine, improper handling and/or poor maintenance result in significant hazards
which can lead to destruction of the machine and serious accidents with considerable injuries. Observe all
safety instructions of this operation manual and contact the manufacturer if you have any questions.
!
Attention
• During drilling operations on walls and ceilings, the Metal Core Drilling Machine must be
safeguarded with the included safety belt. The magnetic adhesion is not maintained in
case of a failure of circuit.
• The cut core will be ejected automatically by the ejector pin. The ejector pin could
possibly break in case of improper use.
• Only use undamaged power cord and extension cords and regularly check on damages.
Danger of an electric shock!
• Power supply and voltage details at the device must correspond.
• When working with this device, wear the following protection equipment:
• Safety goggles, appropriate footwear, ear protection, hair net (for long hair), possibly
also apron and safety helmet.
• The place of installation for the magnet foot must be clean and rustfree.
Remove lacquer and filler.
• Do not execute any electric welding on the workpiece on which the Metal Core Drilling
Machine is used.
• Prior to all operations mount coolant unit.
People with cardiac pacemakers or other medical appliances may only use
this machine following approval by their physician.
Never touch rotating parts! Keep hands and fingers away from the work area
while the motor is running! Failure to do so can result in severe injuries!
11
Publicité
