Change The Passcode; Clear All Orders; Change The Maximum Order Time - Hatco Flav-R 2-Go Manuel D'installation Et D'utilisation

English

Change the Passcode

1. On the Select Lockers screen, touch
2. Enter the Passcode and touch ENTER to access the
System Settings screen.
• The factory set Passcode is: 88888
88888
Passcode Screen
3. Touch SET PASSCODE.
NOTE: The CONFIGURATION selection on the System
Settings screen is for factory use only.
System Settings Screen
4. On the Set Passcode screen, enter the current passcode
and touch ENTER.
5. Enter the new password and touch ENTER.
• The unit will notify the operator "Password successfully
changed".
6. Touch the to return to the Select Lockers screen.
Form No. F2GPM-0721

Clear All Orders

for system settings. 1. On the Select Lockers screen, touch
2. Enter the Passcode and touch ENTER to access the
3. Touch CLEAR ORDERS.
NOTE: The CONFIGURATION selection on the System
4. Touch the

Change the Maximum Order Time

1. On the Select Lockers screen, touch
2. Enter the Passcode and touch ENTER to access the
3. On the "Max. Order Time" line, touch the
4. Touch the
13
System Settings screen.
• The factory set Passcode is: 88888
• All orders will be cleared on the Select Lockers screen.
Settings screen is for factory use only.
System Settings Screen
to return to the Select Lockers screen.
System Settings screen.
• The factory set Passcode is: 88888
to increase or decrease the maximum order time.
• The maximum order time changes in increments of 1
minute and can be set up to 45 minutes.
to return to the Select Lockers screen.
OPERATION
for system settings.
for system settings.
or arrow