Changing The Setpoint Temperature; Locking/Unlocking The Digital Temperature Controller - Hatco SERV-RITE SRB Série Manuel D'installation Et D'utilisation

NOTE: For SRGBW-1 models; heat generated by the overhead
heat lamps is absorbed by the glass surface of the
heated shelf during the preheat cycle. This causes the
temperature shown on the display to rise past the
setpoint temperature. The display will return gradually
to the setpoint temperature once a pan or food product
is placed on the glass surface.
Shutdown
NOTE: For SRBW-1 and SRGBW-1 models, if the overhead
heat lamps are left on when the Power ON/OFF switch
is moved to the OFF position, they will shut off as well.
The lamps will turn on immediately the next time the
Power ON/OFF switch is moved to the ON position.
LIGHTS Control Knob
Digital Temperature
Controller

Changing the Setpoint Temperature

Locking/Unlocking the Digital Temperature
Controller
Power ON/OFF
Switch
OPERATION