Initial Operation - Julabo PURA 4 Mode D'emploi

21 Initial operation

Pos : 18 /=== Arc hi v/=== Archi v_War nhinweise/Gefahr: El ektrisc her Str omsc hlag bei besc hädigtem Gehäus e @ 1\mod_1550751722350_18.doc x @ 13577 @ @ 1
Pos : 19 /=== Arc hi v/=== Archi v_War nhinweise/War nung: Elektrischer Stromsc hl ag (Allgemei n) @ 1\mod_1550762119823_18.doc x @ 13601 @ @ 1
Pos : 20 /=== Arc hi v/=== Archi v_War nhinweise/War nung: heiß er D ampf @ 1\mod_1550225755935_18.doc x @ 13481 @ @ 1
44
Danger of electric shock if the housing is damaged!
If the device housing is damaged, electrically conductive parts may
be touched.
Do not operate or put into operation a device with damaged

housing.
Electrocution!
Risk of injury from electric power.
Compare the mains voltage and frequency with the details on

the model plate.
Only connect the unit to a fused mains connection via a FI circuit

breaker (Ia=30 mA).
The device may only be connected to mains power outlets with a

protective earth (PE)!
The mains plug is a safe insulator of the power supply grid and

must be freely accessible at all times.
Do not start the device if it has a damaged power cable

Check the mains cable regularly for signs of damage

We cannot accept any liability for incorrectly connecting to the

power supply
Danger from hot steam!
Danger of scalding when opening the bath cover
Do not open bath cover at temperatures above 90°C with

steam formation
Allow device to cool down to room temperature

Wear protective gloves and goggles

When opening the bath cover, do not bend over the bath

Initial operation