Professional Operation; Safety Instructions For Operation - Julabo PURA 4 Mode D'emploi

Operator's responsibility - safety instructions

17.2 Professional operation

17.3 Safety instructions for operation

1
2a
or
2b
Pos : 13 /=== T echnisc he Dokumentation/C ORIO / D YN EO / MAGIO / PUR A/PURA LT /Bedi en- und F unktions elemente PUR A @ 1\mod_1459849023371_18.doc x @ 9430 @ 1 @ 1
The water bath may only be configured, installed, maintained and
repaired by trained personnel. The operator must be instructed by a
specialist.
Only use the devices in well ventilated areas. The unit is not suitable for
use in potentially explosive environments.
Do not pour flammable substances into the water bath.
Do not usecorrosive bath fluids .
Thermal hazards due to the wide operating temperature range: hot,
touchable parts and surfaces, superheated steam. Special care and
attention is required.
When using hazardous substances or substances which may be
dangerous, the operator must apply the enclosed safety symbols (1 + 2)
on the front side of the device where they are clearly visible:
Warning of a danger zone. Attention! Observe documentation.
(Operating manual, safety data sheet)
It is essential that you read the user information before switch on the
device.
Area of validity: EU
It is essential that you read the user information before switch on the
device.
Area of validity: USA, NAFTA
35