Publicité
Les langues disponibles
Les langues disponibles
8.9 Mains connection
• Power is supplied by the external mains adapter which also serves to isolate
the mains supply from the scale. The stated voltage value must be the same
as the local voltage.
• Only approved genuine KERN mains adapters may be used in compliance
with Directive EN 60601-1.
The small sticker attached to the side of the display unit indicates the power port:
If the symbol
exhausted. Connect the power supply unit and charge the rechargeable battery.
The flashing symbol
of the rechargeable battery.
When the optional WIFI-interface is used, power consumption increases
8.10 Initial Commissioning
In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap.1). During this
warming up time the balance must be connected to the power supply (mains,
accumulator or battery) and be switched on.
The accuracy of the balance depends on the local acceleration of gravity.
The value of gravity acceleration is shown on the type plate.
TMWN_A-BAPS-def-2211
appears in the display, the rechargeable battery will soon be
informs you during charging about the charging status
19
Publicité
