KERN MWN 300K-1M Notice D'utilisation page 73

Enter the pre-tare value manually via the keyboard:
 Start balance by pressing
 Press and keep pressed
 Acknowledge by
 Now select the desired memory location between 1 and 4
 Press
 Press

TMWN_A-BAPS-def-2211
Wait for stability display
called up. „ApcMen", followed by „WghMod" is displayed
Then „PtArE" appears automatically.
flashing.
using button .
again, „ActuAL" is displayed.
, "ManuAL" is displayed.
Press , the display to enter the pre-tare value appears
flashing. Enter numeric values using
press to change over to the next decimal digit and
finally acknowledge the entered value.
The balance changes into the weighing mode, the entered
pre-tare value is displayed with a minus as a negative value.
.
.
, the application menu is
, in the display „PT" and „M1" appear
and ,
23