Publicité
Les langues disponibles
Les langues disponibles
9.2.1 Subsequent tare weight
The balance can be tared several times successively.
9.2.2 Pretare
The possibility exists to enter either a known pre-tare value via the keyboard or to
store the weight of an object placed on the weighing plate as a pre-tare value.
Store the weight of an object placed on the weighing plate,
in this example a wheelchair:
Start balance by pressing
Place the wheelchair whose weight shall be stored as a pre-
Press
Acknowledge by
Acknowledge by
Now select the desired memory location between 1 and 4
Press
Press
Now place the person to be weighed in wheelchair on the
22
Wait for stability display
tare value, on the weighing plate. (in this example „28.6 kg")
and keep pressed, the application menu is
called up. „ApcMen", followed by „WghMod" is displayed
Then „PtArE" appears automatically.
flashing.
using button
.
again, „ActuAL" appears anew, „PT" and „M1"
stop flashing
again, „Wait" appears shortly, the weight of the
wheelchair will be taken over as pre-tare value. The scales
will change to zero display. "NET" appears.
centre of the weighing platform. Wait for stability display
, the weight of the person will be displayed as net
weight.
.
.
, „ActuAL" will be shown.
, in the display „PT" and „M1" appear
TMWN_A-BAPS-def-2211
Publicité
