Update; Care And Maintenance - Multiplex Cockpit SX 7 Mode D'emploi

14. Update

The COCKPIT SX M-LINK software can be updated as
follows using the included MINI-USB cable and the free
software MULTIPLEX launcher.

MULTIPLEX launcher can be downloaded free of charge at
www.multiplex-rc.de in the software download section.
Performing the update:
· Ensure that your transmitter is fully charged.
· Install the MULTIPLEX launcher.
· Switch on your transmitter.
· Insert the USB cable into your PC and transmitter
The selection menu "USB mode" appears.
· Select "USB data connection".
· Start the MULTIPLEX launcher.
· Select "Cockpit SX Manager" on the launcher.

15. Care and maintenance

The transmitter does not need any special care or mainte-
nance. We strongly recommend an inspection of the sender
dependent on its use by an authorized MULTIPLEX service
center every two to three years. Regular functionality and
range tests are obligatory.
A soft bristle brush is recommended for removing dust and
dirt. Stubborn stains, particularly fats and oils, can be removed
using a damp cloth and if necessary a mild household cleaner.
Under no circumstances should you use "heavy-duty" cleaning
agents such as spirits or solvents!
38
· Press the update symbol.
· Select the appropriate firmware and press "Install".
· Follow the further instructions of the MULTIPLEX launcher.
· Carefully check all your model and transmitter settings after
the update.
Avoid jolting or applying undue pressure to the transmitter.
The transmitter should be stored and transported in a suitable
container, such as a case or transmitter bag. See section 17
recommended accessories!
We update and improve our products on a regular basis. You
can find software updates for Multiplex products on the Inter-
net at www.multiplex-rc.de under Software. It's worth paying
a visit regularly!