Other Instructions And Checks; Specification - Multiplex Cockpit SX 7 Mode D'emploi

1.5. Other instructions and checks

· Build your model carefully, this applies above all to any nec-
essary repairs to your model. You are responsible for your
own actions.
· Attach the servos and aileron pushrods in such a way so
that the ailerons move smoothly and do not jam when fully
deflected.
· Adjust the output arms and pushrods accordingly. Keep the
backlash as small as possible. This is the only way to ensure
that there is no undue strain placed on the servo and there-
fore to make sure that its performance is fully utilized. These
measures ensure the servo has a maximized lifespan and
guarantee the highest degree of safety.
· Protect the receiver, batteries, servos and other RC com-
ponents effectively from vibrations. Follow the instructions
given in these operating instructions. This especially involves
correctly balancing propellers and rotors. Replace damaged
parts or parts which are not running correctly balanced.
· Do not stretch or kink the cable and protect it from rotating
parts.
· Avoid using unnecessarily long or superfluous servo ex-
tension leads and ensure a sufficient cable cross section
(voltage loss). A benchmark of at least 0.24 mm
mended. For digital servos in the 79xx, 8xxx or 9xxx model
ranges, we would even recommend 0.33 mm
· Avoid interference pulses caused by static charges and
strong electric or electromagnetic fields by taking appropri-
ate interference suppression measures (e.g. by suppressing
the electric motor with a suitable capacitor) and ensure suf-
ficient distance is maintained between the RC equipment,
receiver aerial, wiring and batteries.

2. Specification

Channel number 7 - Cockpit SX 7
9 - Cockpit SX 9
Model memory 200
Transmission mode -15...+55 °C
Übertragungsart M-LINK
Aerial IOAT
· Ensure sufficient distance is maintained between wires car-
rying high currents (e.g. electric motor) and the RC equip-
ment. The wiring between the brushless e-motors and their
actuators in particular must be kept as short as possible
(benchmark max. 10 to 15 cm).
· Carefully check all functions and familiarize yourself with the
operation of the transmitter before launching the model.
· Check ease of motion and no play of the ailerons and rotor
linkages.
· Ensure stability and flawless condition of pushrods, rotor
linkages, hinges etc.
· Check model for breakages, flaws and shear edges on any
of the RC components or on the motor.
· Ensure flawless condition and contact safety of wires and
plug connections.
· Check the condition of the power supply and its wiring in-
cluding switch harnesses by inspecting the exterior of the
cells. This also involves employing a charging procedure
which is appropriate for the battery type with a suitable char-
ger and regularly carrying out maintenance on the battery.
is recom-
2
2 .
Frequency
Power supply
Total weight approx.
Dimensions approx.
2400...2483,5 MHz
LiFe battery 3,3V/4000 mAh
850 g
190 x 210 x 60 mm

23