Telemetry; Wingstabi - Multiplex Cockpit SX 7 Mode D'emploi

8. Touch display/main menu
Servo programming:
a. Servo settings
- Neutral position adjustment
- End position adjustment (EPA)
- Servo reverse
b. Servo assignment
Assign the functions to the channels on the receiver
c. Servo monitor

7. Clock symbol: Timer menu
See section 8. - Time display
8. Speedometer symbol: Telemetry
Setting the telemetry data

9. Telemetry

With the COCKPIT SX, you can make use of the advantages
of telemetry. A prerequisite for this is the use of a teleme-
try-capable M-LINK 2.4 GHz receiver and if necessary the
corresponding sensors.

9.1. WINGSTABI

The COCKPIT SX supports (from version 1.20) the output of
the WINGSTABI - telemetry.
The following values can be outputted:
· Status messages such as flight mode or flight phase
· Display of sensitivity for aileron - elevator - rudder
· Display of the receiver voltage
First, activate the telemetry transmission for "COCKPIT" in the
WINGSTABI using the MULTIPLEX launcher in the transmitter
settings. Assign the desired telemetry values to the addresses.
30
· Sensor address 0..3 or 4..7
Here you can change the sensor names in the menus and
select which data you want to have displayed and which
data you want to have announced.
· Language/vario
Here you can change the vario address, vario volume and
audio volume for the transmitter and define the announce-
ment intervals
· Confirm warning LED
The warning LED for the voltage and residual capacity (tank
display) is switched off after the alarm has been deactivated.
9. Person symbol: Trainer mode and/or simulation mode
The speech output of the telemetry values is integrated into
the transmitter. It receives the telemetry data from the model
completely independently of the transmitter and announces
the values as a speech output along with vario sounds and
warning signals.
Next, you can select the addresses which are to be displayed
or announced in the telemetry menu of the COCKPIT SX.
The announcement of the WINGSTABI status messages always
has priority.