Grundfos CR Serie Livret Technique page 76

9
Vibra�on report
According to ISO 20816-1 / ISO 10816-7
General Info
Customer name
Customer order no.
Customer TAG no.
GRUNDFOS order no.
Pump type
Serial number
Test Condi�ons: The pump is floor mounted on a steel plate supported by Sylomer foam. For vibra�on
measurement posi�ons see Figure.
P2 [kW]
Frequency [Hz]
3
Flow rate [m /h]
Remarks:
Result of Measurement:
Posi�on RMS
vibra�on
Velocity
(mm/s)
1
2
3
4
5
6
7
8
9
Report
Cleaned and dried pump
General Info
Customer name
Customer order no.
Customer TAG no.
GRUNDFOS order no.
Pump type
Serial number
We the undersigned hereby confirm that the above-men�oned product is manufactured according to
specifica�ons men�oned in data booklet for the relevant product type. This means that prior to assembly,
pump components are washed in pure, hot soapy water, rinsed in de-ionized water and dried.
The pump is wrapped in a plas�c bag before being packed.
The pump has not been performance-tested.
76
Rapport sur les vibrations
Part number
Model
Voltage [V]
Number of Poles
Head [m]
Typical Zone boundary - ISO 20816-1:
Vel. Range of typical zone boundary
(mm/s) values for non-rota�ng parts.
0,28
0,45
0,71
Zone
1,12
boundry
1,80
A/B Zone
2,80
0,71 to 4,5 boundry
4,50
B/C Zone
7,10
1,8 to 9,3 boundry
9,30
C/D
11,2
4,5 to 14,7
14,7
18,0
28,0
45,0
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no. 96507932/PMI/000/ 1249870
Pompe nettoyée et séchée
Part number
Model
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no. 96507934/PMI/000/1252874
CR, CRI, CRN, CRT, CRE, CRIE, CRNE, CRTE
Rapport de test moteur
Motor test report
Customer name
Customer order no.
Customer TAG no.
GRUNDFOS order no.
GRUNDFOS DUT id.
Part number
Motor no.
Motor serie no.
We the undersigned hereby guarantee and certify that the above motor has been tested. The performance of the
motor can be seen in the motor test report on the next page.
Pompe à vide
Vaccum Dried Pump
Customer name
Customer order no.
Customer TAG no.
GRUNDFOS order no.
GRUNDFOS DUT id.
Part number
GRUNDFOS hereby confirms that the pump mentioned above is manufactured according to the specifications
mentioned in the "CR, CRI, CRN Custom-built pumps" data booklet. This means that after the performance test
of the pump, a heat and vacccum drying process will ensure that no liquid water is present insider the pump.
The in-and outlet of the pump is sealed by means of a sticker after the drying process.
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no. 96507933P01/PMI/000/1135258
GRUNDFOS
Date:
Signature:
Name:
Dept.:
Part no. 98606312/PMI/000/1221711