Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY STEP 1
HARDWARE FOR STEP 1
PART
TYPE
DESCRIPTION
A
BOLT
M8X1.25PX15L
B
SPRING WASHER
8.0X13.0X1.5T
C
FLAT WASHER
8.2X13.0X1.4T
1
C
B
A
3
12
A
Open HARDWARE FOR STEP 1.
QTY
B
Attach the LEFT CONSOLE MAST (1) to the
4
BASE FRAME (3) using 4 BOLTS (A), 4 SPRING
WASHERS (B) and 4 FLAT WASHERS (C).
4
4
NOTE: Do not fully tighten bolts until STEP 4.
A
B
C
ASSEMBLY STEP 2
HARDWARE FOR STEP 2
PART
TYPE
DESCRIPTION
A
BOLT
M8X1.25PX15L
B
SPRING WASHER
8.0X13.0X1.5T
C
FLAT WASHER
8.2X13.0X1.4T
4
2
4
A
C B
3
A
Open HARDWARE FOR STEP 2.
QTY
B
Attach LEAD WIRE to bottom end of CONSOLE
4
CABLE (4). Pull LEAD WIRE through RIGHT
CONSOLE MAST (2). After pulling the lead wire
4
through the mast, the top of the CONSOLE
4
CABLE (4) should be located at the top of
the mast.
C
Attach the RIGHT CONSOLE MAST (2) to the
BASE FRAME (3) using 4 BOLTS (A), 4 SPRING
WASHERS (B) and 4 FLAT WASHERS (C).
NOTE: Do not fully tighten bolts until STEP 4.
A
B
C
13
Publicité
