Publicité
Les langues disponibles
Les langues disponibles
3 Getting Started
1. Open the Web browser on your computer.
2. Enter the instrument's hostname or IP address into the browser's Address field. The following
home page will appear.
3. Click on the Web Control tab on the top of the page to begin controlling your instrument.
4. For additional help about any of the pages, click on the ?.
If desired, you can control access to the Web interface using password protection. As shipped, no
password is set. To set a password, click on the Settings (gear) icon. Refer to the on-line help for
additional information about setting a password.
Using Telnet
Power supplies allow any combination of up to six simultaneous telnet, data socket,
and control socket connections to be made.
In an MS-DOS Command Prompt box type: telnet hostname 5024 where hostname is the unit's
hostname or IP address, and 5024 is the instrument's telnet port.
You should get a Telnet session box with a title indicating that you are connected to the power supply.
Type the SCPI commands at the prompt.
90
Keysight PV8900 Series Operating and Service Guide
Publicité
