Publicité
Les langues disponibles
Les langues disponibles
5 SCPI Programming Reference
TRIGger:ACQuire:TOUTput[:ENABle] 0|OFF|1|ON
TRIGger:ACQuire:TOUTput[:ENABle]?
Enables measurement triggers to be sent to a digital port pin. The digital port pin must be configured
as trigger output before it can be used as a trigger source (see
Parameter
0|OFF|1|ON, *RST OFF
Enable sending measurement triggers to digital pins: TRIG:ACQ:TOUT ON
TRIGger:ARB:SOURce <source>
TRIGger:ARB:SOURce?
TRIGger:ELOG:SOURce <source>
TRIGger:ELOG:SOURce?
TRIGger:TRANsient:SOURce <source>
TRIGger:TRANsient:SOURce?
TRIG:ARB:SOURce - Selects the trigger source for arbitrary waveforms:
TRIG:ELOG:SOURce - Selects the trigger source for external data logging:
TRIG:TRANsient:SOURce - Selects the trigger source for the transient system:
BUS
Selects a remote interface trigger command.
EXTernal
Selects ALL digital port pins that have been configured as trigger sources.
IMMediate
Triggers the transient as soon as it is INITiated.
PIN<1-7>
Selects a digital port pin configured as a trigger input.
Parameter
BUS | EXTernal | IMMediate | PIN<1-7> *RST BUS
Select digital port pin 1 as the Arb trigger source: TRIG:ARB:SOUR PIN1
Select digital port pin 1 as the transient trigger source: TRIG:TRAN:SOUR PIN1
228
External Trigger
Typical Return
0 or 1
Typical Return
BUS, EXT, IMM, PIN<n>
Keysight PV8900 Series Operating and Service Guide
I/O).
Publicité
